What is a no-prep veneer?
Last updated
A no-prep veneer is a thin ceramic shell bonded to the tooth to improve its shade and shape without removing the natural tooth surface.
Conventional veneers require front-surface reduction to make room for the ceramic. No-prep veneers skip that step. At your consultation, ask whether treatment involves no tooth reduction or minimal preparation, where some enamel is removed.
How is a no-prep veneer different from a conventional veneer?
The main difference is whether the tooth is cut. A conventional veneer is bonded after the front of the tooth is shaved down; a no-prep veneer is bonded directly onto the natural tooth.
| No-prep veneer (BLACK FILM) | Conventional veneer | |
|---|---|---|
| Tooth reduction | None. No drill is used | The front of the tooth is shaved |
| Thickness | 0.05 to 0.1 mm measured | Usually thicker |
| Anesthesia | Not used | Often needed for the shaving |
| Temporary teeth | Not needed | Often needed while veneers are made |
| Bonded to | Enamel | May expose dentin, depending on depth |
| After removal | The natural tooth remains | A shaved tooth remains and needs covering again |
If a no-prep veneer is removed, is my tooth back to normal?
Yes. Because nothing was cut, the natural tooth remains when BLACK FILM is removed. Removal does not cut the tooth either: an Er:YAG laser breaks down the bonding layer so the veneer can be lifted off.
That means the shade or shape can be changed later without damaging the tooth. A conventional veneer leaves a shaved tooth behind, which has to be covered again.
How thin is BLACK FILM?
BLACK FILM measures 0.05 to 0.1 mm, about 0.1 mm on average. That is thinner than a contact lens.
On bonding day, we measure the films made for you with a thickness gauge and show you the readings.