Frequently asked questions
Answers about tooth reduction, production time, costs and care after treatment.
Last updated
No-prep veneer basics
What is a no-prep veneer?
A no-prep veneer is a thin ceramic shell bonded to the tooth to improve its shade and shape without removing the natural tooth surface.
Conventional veneers require front-surface reduction to make room for the ceramic. No-prep veneers skip that step. At your consultation, ask whether treatment involves no tooth reduction or minimal preparation, where some enamel is removed.
How is a no-prep veneer different from a conventional veneer?
The main difference is whether the tooth is cut. A conventional veneer is bonded after the front of the tooth is shaved down; a no-prep veneer is bonded directly onto the natural tooth.
| No-prep veneer (BLACK FILM) | Conventional veneer | |
|---|---|---|
| Tooth reduction | None. No drill is used | The front of the tooth is shaved |
| Thickness | 0.05 to 0.1 mm measured | Usually thicker |
| Anesthesia | Not used | Often needed for the shaving |
| Temporary teeth | Not needed | Often needed while veneers are made |
| Bonded to | Enamel | May expose dentin, depending on depth |
| After removal | The natural tooth remains | A shaved tooth remains and needs covering again |
What is BLACK FILM, and what does the name mean?
BLACK FILM is a no-prep veneer made and fitted at BLACK FILM SEOUL, our dental clinic in Gangnam, Seoul. The name stands for Bespoke Laminate with Casting-tek Film: a fully custom (bespoke) film made by hand-casting, designed only for no-prep veneers.
Each film is made by hand using press casting to control the thickness of the edges between teeth and along the gumline.
Tooth reduction and removal
Does BLACK FILM require any tooth reduction?
No. BLACK FILM is bonded without shaving or reshaping the natural tooth surface. No tooth-reduction drill or anesthesia is used.
BLACK FILM SEOUL offers a full refund if tooth reduction occurs during BLACK FILM treatment.
If a no-prep veneer is removed, is my tooth back to normal?
Yes. Because nothing was cut, the natural tooth remains when BLACK FILM is removed. Removal does not cut the tooth either: an Er:YAG laser breaks down the bonding layer so the veneer can be lifted off.
That means the shade or shape can be changed later without damaging the tooth. A conventional veneer leaves a shaved tooth behind, which has to be covered again.
Won't adding a veneer without shaving make my teeth look bulky?
BLACK FILM measures 0.05 to 0.1 mm, so your profile barely changes. A protruding look usually comes from thick veneers.
If your teeth already sit forward, the result can differ, so this is assessed in person.
Thickness, material and craft
How thin is BLACK FILM?
BLACK FILM measures 0.05 to 0.1 mm, about 0.1 mm on average. That is thinner than a contact lens.
On bonding day, we measure the films made for you with a thickness gauge and show you the readings.
Are thin veneers more likely to break?
Durability depends on both the ceramic and its bond to the tooth. BLACK FILM uses IPS e.max Press ceramic and is bonded to enamel that has not been reduced.
Chipping or debonding can still occur. Your bite, grinding or hard-object biting habits, and daily care all affect the result.
How is BLACK FILM made?
Every BLACK FILM veneer is hand-made by heat pressing.
- Wax is carved in 0.05 mm steps under a microscope to form the shape.
- The wax form is encased in investment material.
- The wax is burned out at high temperature.
- Molten ceramic is pressed into the empty space.
- The thickness is refined by hand after pressing.
- Color is brushed on layer by layer (staining).
Digital milling cannot follow the ultra-thin edges between teeth and near the gums, or the curves that wrap around a tooth, so it is not used for BLACK FILM.
Why does BLACK FILM take two weeks to make?
Wax carving, ceramic pressing, thickness refinement and shade adjustment are all done by hand. A set of sixteen veneers for the upper and lower teeth takes about two weeks on average.
Each dental technician makes no more than eight films a day. Production time also includes quality checks and remaking any films that break during the process.
Can I see my veneers being made?
Yes. BLACK FILM is made in our in-house lab, the BLACK FILM SEOUL Atelier, and you can watch through the glass from the waiting room. The atelier (808LAB) is run by a dentist, so the dentist and technicians work side by side throughout.
A natural look
Will my teeth look too white or fake?
We discuss your preferred brightness first, then choose a shade and shape with your skin tone, lip line and surrounding teeth in mind. BLACK FILM uses thin, translucent ceramic that lets the natural tooth shade show through.
You can see the veneers on your teeth during the fitting. This is the time to ask for a brighter shade or one closer to your natural teeth.
If the veneer is translucent, won't my own tooth color show through unevenly?
It can, which is the hardest part of translucent veneers. For BLACK FILM, we predict where color will shift and correct it layer by layer with a fine brush under a microscope (staining). This evens out the color without making the veneer thicker or less translucent.
Can I choose the shade and shape?
Yes. BLACK FILM is designed bespoke. We analyze 29 characteristics, including your face, gums and tooth texture, and record your preferences in a bespoke design sheet.
At the fitting, the veneers are tried in and checked under several lights. If you want a change, the artisan adjusts color and shape on the spot.
Can it look natural if my teeth are yellow or discolored?
Often, yes. The color is mixed and corrected with your natural shade in mind, so darker teeth can still look clear. If discoloration is severe, whitening may be planned first; this is decided in person.
Is it right for me?
Who are no-prep veneers right for?
No-prep veneers suit people who want to improve the shape and color of their front teeth without cutting them. Common concerns include:
- Gaps between front teeth, or dark triangles near the gums
- Small teeth, chipped front teeth, or prominent front teeth
- Discoloration, staining, or an uneven smile line
We assess suitability after examining your teeth and gums in person.
Are there cases where no-prep veneers are not recommended?
In these cases another treatment is considered first, or planned alongside:
- Teeth that already protrude or are badly crooked: orthodontics first.
- Very severe discoloration: whitening first.
- Gum disease or receding gums: the cause is treated as part of the plan.
- Heavy grinding: a higher risk of chipping that needs discussing.
Can I have it if my gums have receded?
Often, depending on your teeth and gums. We first check the cause and extent of the recession, plan gum treatment if needed, and design around your gum line.
Can veneers done elsewhere be replaced with BLACK FILM?
Often, depending on the remaining teeth and gums. Removal is done with care to protect the natural tooth. Any enamel already cut by earlier treatment cannot be restored, so the plan focuses on preserving what remains.
Downsides and risks
What are the downsides and side effects of no-prep veneers?
No-prep veneers can still chip or come loose. Biting chopsticks or hard objects, accidents and heavy grinding raise the risk.
- Getting used to them: some people notice the veneers at first. Shape and thickness are tuned at the fitting to keep this minimal.
- Gums: a poorly fitting edge (margin) or poor cleaning can lead to gum inflammation, staining at the edge or decay.
- Time: hand-making takes about two weeks, and bonding takes a full day.
Precise margins, check-ups every six months and good daily care, including flossing, keep these risks low.
Why do gums swell or look dark after veneers?
Check the position and shape of the veneer's edge (margin), how well it fits, and oral hygiene. Margins set too deep under the gum, bulky edges near the gum, or gaps and steps at the edge all trap plaque.
BLACK FILM uses a feather-edge margin that thins toward the edge, and the margin position (above, at or just under the gum line) is chosen for each patient's gums.
10-year warranty and care
What does the BLACK FILM 10-year warranty cover?
The 10-year warranty provides free aftercare for covered issues, including fractures or discoloration from normal eating, lifting and bonding defects. The same criteria apply to every patient.
After treatment you receive a certificate of authenticity and an aftercare warranty signed by your dentist, dental technician and dental hygienist. Every BLACK FILM veneer passes thickness, translucency, color-matching and tolerance checks.
Check-ups are required one week after bonding and every six months thereafter. Damage from accidents or habits may incur a charge. The warranty document reviewed at your consultation sets out the full terms.
What is covered free of charge, and what is paid?
| Free aftercare | Paid |
|---|---|
| Fractures, chips or discoloration from normal eating (including crab shell, ribs and nuts) | Biting chopsticks (the most common cause of fractures) |
| Lifting, gaps or color change | Biting pens or other hard objects, opening bottles |
| Bonding defects | Falls, accidents and other trauma |
| Decay or gum problems at the margin caused by a BLACK FILM defect | Decay or gum problems from poor oral hygiene |
| Heavy grinding |
The warranty requires a check-up one week after bonding and every six months after that. Coverage is decided once the cause is known; exact terms are explained at your consultation and in your agreement.
What if a veneer chips or comes off?
Keep the piece and contact us. Because nothing was cut, your natural tooth is still there, so you can carry on as normal without a temporary tooth. If the damage is covered, we re-bond or remake it free of charge for ten years.
How do I look after no-prep veneers?
Brush and floss as you would natural teeth, paying extra attention to the edge where veneer meets tooth near the gum.
- Don't bite chopsticks, pens or other hard objects
- Don't open bottles with your teeth
- Have a check-up every six months
Treatment and cost
How many visits does BLACK FILM take, and how long?
It takes about two weeks from impressions to bonding.
- Consultation, examination, bespoke design meeting and impressions
- Atelier production (about two weeks on average for sixteen upper and lower veneers)
- Fitting and bonding. Color, shape and fit are refined on the spot, so please keep the whole day free.
- Check-up one week after bonding
- Check-ups every six months after that
Why does bonding take a whole day?
The fitting includes checks of shade, shape and fit, followed by any adjustments. The films are then bonded one at a time, so we allow plenty of time for this appointment.
We also check for bubbles or debris beneath the thin, translucent films. A film with a bubble is remade. Please keep the bonding day free.
How does the dedicated BLACK FILM SEOUL team work?
Each patient has a dedicated team of a dentist, a dental hygienist and a dental technician from the bespoke team. The same people stay with you from the first day to the last, and they work the same schedule so your team is there whenever you visit.
What are the four signatures?
Before bonding, four people must all approve the result: you, your dental hygienist, your technician and your dentist. If you are happy but a specialist is not, it goes back for refinement; if you want a change, it is reworked too.
How much does BLACK FILM cost?
Every BLACK FILM veneer is 100% bespoke and handmade, so the cost depends on the number of veneers, the condition of your teeth and the design. Your dentist will explain the exact cost after your consultation.
Visiting
What services are available during my visit?
The following services are available at the concierge desk before or after treatment.
- Drinks: coffee, tea, smoothies and more
- First aid and sanitary items: pain relief, digestives, plasters
- Touch-up cosmetics: remover, tint, foundation
- Oral care: mouthwash, toothpaste, brushes, floss
- Storage and loans: luggage, umbrellas, power banks
Where is BLACK FILM SEOUL?
BLACK FILM SEOUL is on the 8th floor of 808 Tower, 470 Gangnam-daero, Gangnam-gu, Seoul, a one-minute walk from Sinnonhyeon Station Exit 5.
Hours: Mon–Tue 10:00–19:00 (break 13:00–14:00), Thu–Fri 14:00–21:00, Sat 10:00–14:00. Closed Wednesdays, Sundays and public holidays.
Visiting from abroad
Can international patients have BLACK FILM treatment?
Yes, and consultations are available in English. It takes about two weeks from impressions to bonding, and bonding takes a full day, so plan your stay around that.
Can I get aftercare after I go home?
Yes. BLACK FILM SEOUL has local branches in Japan and the US, so you can be treated in Seoul and receive the same aftercare there, under the same 10-year warranty terms.
BLACK FILM consultation
Please visit us for an examination of your teeth and gums. We can then explain whether treatment is suitable, how many veneers you may need and the cost.